

Product description: The SolarSheat 1000G is a modular solar air heater designed for supplemental room heating. The SolarSheat 1000G can heat a room from 71 to 300 ft2 (or 7 to 28 m2) when the sun is shining. Air is drawn through the SolarSheat, heated up, and pushed back into the room.
Product description: The SolarSheat 1500G is a glazed recirculation solar air collector designed for space heating applications. Air is drawn from inside the room through the bottom of the collector and blown out through a duct in the top. The unit is self-powered. No electrical hook-up required.
Product description: The SolarSheat 1500G 2 Pak can supplement the heat
for a large room up to 1500 square feet* in the daytime and installs in a few
hours on a south facing wall or roof.** TheSolarSheat 1500G 2 Pak can drive
solar heated air through a wall or through a cathedral ceiling. For longer duct
runs, solar powered booster fans are available. It's the perfect heater when
there is a large area to heat, adjacent to the south facing wall or roof**,
high temperature rises (40ºF & higher) and/or cloudy weather performance are
desired. A duct kit, including a digital thermostat, is included with the
SolarSheat 2 Pak. The solar powered fan keeps it electrically separate from the
rest of the house. Tough tempered glass keeps the air hot even during cold and
windy winter days. The fan is built into the collector so installation is a
snap!
*depending on heat loss and solar gain. **with cathedral ceiling
Product description: Heat from one to eight individual rooms with SolarSheat Multi-Room Space Heating Systems. Each system includes 1-8 SolarSheat 1500GS panels, an appropriately sized fan, controls, duct kit, side hole gaskets, detailed instructions, etc. The table below summarizes each system. The 1501 DC and 1502 DC are powered with PV panels to keep the whole system electrically separate from the rest of the home! Tools are available to choose the correct duct type depending on the situation. SolarSheat Multi-Room Space Heating Systems are compatible with our Two Stage Zone Control System, to add further intelligence to the system. Collectors may be mounted on the roof or wall.
Product description: An array of Solarsheat air collectors can be used to retrofit any furnace. At least four SolarSheat 1500GS solar collectors attaches to cold air return. Whenever the SolarSheat air collectors are warm and there is a call for heat from the solar thermostat, the furnace's fan and solar fan turn on, blowing solar heated air into the home through existing ductwork.
Product description: Two SolarSheat air collectors are used to preheat the fresh air coming into the HRV during winter. When the incoming fresh air is above room temperature (68ºF), the HRV bypass damper automatically redirects the air around the HRV core. This allows the solar heated air to be used inside the house at the maximum possible temperature.
| Attachment | Size |
|---|---|
| SolarSheat HVR Brochure | 1.21 MB |
| SolarSheat Brochure | 583.29 KB |
